SINAR DRYPRO INLINE MOISTURE & TEMPERATURE MONITORING
(SUITABLE FOR FREE FLOWING HYGROSCOPIC MATERIALS)
The Drypro™ is a mains powered single or multi sensor moisture measuring system.
There are only three operator modes, which make the Drypro™ quick to learn and easy to use. Once set up, the Drypro™ can give sequential moisture and temperature readings from each sensor installed.
Your Drypro™ is supplied with seven crop calibrations as standard, but can store up to a maximum of twenty-five. Contact QAQC LAB if your calibration requirements change.
STANDARD PENDULUM
SENSOR
MAGNETIC MOUNT
FLAT SENSOR INSTALLED IN A GRAIN DRYER
DRYPRO CONTROL PANEL BOX
620 7080
SEQUENTIAL SENSOR OUTPUT FOR BATCH TYPE DRYERS
PROVIDES TEMPERATURE & MOISTURE OUTPUT
AVAILABLE FLOW REGULATOR
FOR CONTINUOUS SYSTEMS
MINIMIZE FUEL WASTE
Dimensions (mm):H300 x W 400 x D150
Display Unit Weight:8.0 KG
Max. Number of Sensors:4
Max. recommended distance between display Unit and sensors:
100 Meters.
Display Unit Construction:Mild steel, powder coated.
Mounting:4 off wall mounting lugs to suit M8 bolts.
Operating Environment:0 to +55ºC.
Storage Temperature:-20 ºC to +55 ºC;
Humidity to 95% non-condensing.
Humidity:Up to 95% non-condensing.
Display:Alphanumeric LCD, 2 x 20 characters.
Processor:Intel 80C31 microprocessor.
Memory:EPROM and RAM
Calibrations supplied.
(Upgradable via the RS232 port).7
Max. calibration capacity:25
Data Output Formats:RS232 C, ASCII code, 300 Baud.
Max recommended transmission distance - 15m.RS485.
Max transmission distance – 2Km.
Moisture Accuracy:± 0.5% dependant on application
and moisture level.
Output Interval. Minimum (seconds).4
Temperature Accuracy:± 1 ºC.
Displayed Temperature:ºC or ºF
Display Resolution:1 Decimal place.
Power Supply80-240 V AC 50/60Hz 0.5 A
Fuse Rating:
FS1 250 V 20mm (F) Quick blow.
FS2 250 V 20mm (F) Quick blow.
FS3 250 V 20mm (F) Quick blow.
FS4 250 V 20mm (F) Quick blow.
FS5 250 V 20mm (F) Quick blow.
Temperature Correction:Temperature sensor mounted on fin.
Correction factor is software programmable.
Correction range 0-40 ºC.
Sensor Dimensions (mm): 80 x 380
Sensor Weight: 1.2 KG
Operating Environment:0 to +70 ºC.
Storage Temperature:-20 ºC to +70 ºC;
Humidity to 95% non-condensing.
Humidity:Up to 95% non-condensing.
Cable Length Supplied:2 meters.
TECHNICAL SPECIFICATIONS CONTROL PANEL
TECHNICAL SPECIFICATIONS SENSORS
COMPATIBLE PROBE TYPE PORTABLE ANALYZER CAN BE USED FOR CALIBRATION, OR FOR TESTING FOR SUITABLE
SENSOR PLACEMENT LOCATIONS
AVAILABLE WITH 4- 20 ma, or 2-10 V DC OUTPUT FOR CONTROL AUTOMATION OR DATA LOGGING. (DATA ACQUISITION MODULE AVAILABLE), OR WITH RS 232 OUTPUT WITH TIME, DATE, MOISTURE, AND TEMPERATURE INFORMATION OUTPUT VIA MLOG SOFTWARE.
H300 x W 400 x D150
